Module:template parser
Documentation for this module may be created at Module:template parser/doc
--[[
NOTE: This module works by using recursive backtracking to build a node tree, which can then be traversed as necessary.
Because it is called by a number of high-use modules, it has been optimised for speed using a profiler, since it is used to scrape data from large numbers of pages very quickly. To that end, it rolls some of its own methods in cases where this is faster than using a function from one of the standard libraries. Please DO NOT "simplify" the code by removing these, since you are almost guaranteed to slow things down, which could seriously impact performance on pages which call this module hundreds or thousands of times.
It has also been designed to emulate the native parser's behaviour as much as possible, which in some cases means replicating bugs or unintuitive behaviours in that code; these should not be "fixed", since it is important that the outputs are the same. Most of these originate from deficient regular expressions, which can't be used here, so the bugs have to be manually reintroduced as special cases (e.g. onlyinclude tags being case-sensitive and whitespace intolerant, unlike all other tags). If any of these are fixed, this module should also be updated accordingly.
]]
local export = {}
local data_module = "Module:template parser/data"
local magic_words_data_module = "Module:data/magic words"
local pages_module = "Module:pages"
local parser_extension_tags_data_module = "Module:data/parser extension tags"
local parser_module = "Module:parser"
local string_utilities_module = "Module:string utilities"
local table_module = "Module:table"
local require = require
local m_parser = require(parser_module)
local mw = mw
local mw_title = mw.title
local mw_uri = mw.uri
local string = string
local table = table
local anchor_encode = mw_uri.anchorEncode
local build_template -- defined as export.buildTemplate below
local class_else_type = m_parser.class_else_type
local concat = table.concat
local encode_uri = mw_uri.encode
local find = string.find
local format = string.format
local gsub = string.gsub
local html_create = mw.html.create
local insert = table.insert
local is_node = m_parser.is_node
local load_data = mw.loadData
local lower = string.lower
local make_title = mw_title.makeTitle -- unconditionally adds the specified namespace prefix
local match = string.match
local new_title = mw_title.new -- specified namespace prefix is only added if the input doesn't contain one
local next = next
local pairs = pairs
local parse -- defined as export.parse below
local parse_template_name -- defined below
local pcall = pcall
local rep = string.rep
local reverse = string.reverse
local select = select
local sub = string.sub
local title_equals = mw_title.equals
local tostring = m_parser.tostring
local type = type
local umatch = mw.ustring.match
--[==[
Loaders for functions in other modules, which overwrite themselves with the target function when called. This ensures modules are only loaded when needed, retains the speed/convenience of locally-declared pre-loaded functions, and has no overhead after the first call, since the target functions are called directly in any subsequent calls.]==]
local function decode_entities(...)
decode_entities = require(string_utilities_module).decode_entities
return decode_entities(...)
end
local function encode_entities(...)
encode_entities = require(string_utilities_module).encode_entities
return encode_entities(...)
end
local function is_valid_title(...)
is_valid_title = require(pages_module).is_valid_title
return is_valid_title(...)
end
local function pattern_escape(...)
pattern_escape = require(string_utilities_module).pattern_escape
return pattern_escape(...)
end
local function php_trim(...)
php_trim = require(string_utilities_module).php_trim
return php_trim(...)
end
local function replacement_escape(...)
replacement_escape = require(string_utilities_module).replacement_escape
return replacement_escape(...)
end
local function scribunto_param_key(...)
scribunto_param_key = require(string_utilities_module).scribunto_param_key
return scribunto_param_key(...)
end
local function shallowcopy(...)
shallowcopy = require(table_module).shallowcopy
return shallowcopy(...)
end
local function sorted_pairs(...)
sorted_pairs = require(table_module).sortedPairs
return sorted_pairs(...)
end
local function split(...)
split = require(string_utilities_module).split
return split(...)
end
local function table_len(...)
table_len = require(table_module).length
return table_len(...)
end
local function uupper(...)
uupper = require(string_utilities_module).upper
return uupper(...)
end
--[==[
Loaders for objects, which load data (or some other object) into some variable, which can then be accessed as "foo or get_foo()", where the function get_foo sets the object to "foo" and then returns it. This ensures they are only loaded when needed, and avoids the need to check for the existence of the object each time, since once "foo" has been set, "get_foo" will not be called again.]==]
local data
local function get_data()
data, get_data = load_data(data_module), nil
return data
end
local frame
local function get_frame()
frame, get_frame = mw.getCurrentFrame(), nil
return frame
end
local magic_words
local function get_magic_words()
magic_words, get_magic_words = load_data(magic_words_data_module), nil
return magic_words
end
local parser_extension_tags
local function get_parser_extension_tags()
parser_extension_tags, get_parser_extension_tags = load_data(parser_extension_tags_data_module), nil
return parser_extension_tags
end
local Parser, Node = m_parser.new()
------------------------------------------------------------------------------------
--
-- Nodes
--
------------------------------------------------------------------------------------
Node.keys_to_remove = {"handler", "head", "pattern", "route", "step"}
local function expand(obj, frame_args)
return is_node(obj) and obj:expand(frame_args) or obj
end
export.expand = expand
function Node:expand(frame_args)
local output = {}
for i = 1, #self do
output[i] = expand(self[i], frame_args)
end
return concat(output)
end
local Wikitext = Node:new_class("wikitext")
-- force_node ensures the output will always be a node.
function Wikitext:new(this, force_node)
if type(this) ~= "table" then
return force_node and Node.new(self, {this}) or this
elseif #this == 1 then
local this1 = this[1]
return force_node and not is_node(this1) and Node.new(self, this) or this1
end
local success, str = pcall(concat, this)
if success then
return force_node and Node.new(self, {str}) or str
end
return Node.new(self, this)
end
-- First value is the parameter name.
-- Second value is the parameter's default value.
-- Any additional values are ignored: e.g. "{{{a|b|c}}}" is parameter "a" with default value "b" (*not* "b|c").
local Parameter = Node:new_class("parameter")
function Parameter:new(this)
local this2 = this[2]
if class_else_type(this2) == "argument" then
insert(this2, 2, "=")
this2 = Wikitext:new(this2)
end
return Node.new(self, {this[1], this2})
end
function Parameter:__tostring()
local output = {}
for i = 1, #self do
output[i] = tostring(self[i])
end
return "{{{" .. concat(output, "|") .. "}}}"
end
function Parameter:next(i)
i = i + 1
if i <= 2 then
return self[i], self, i
end
end
function Parameter:get_name(frame_args)
return scribunto_param_key(expand(self[1], frame_args))
end
function Parameter:get_default(frame_args)
local default = self[2]
if default ~= nil then
return expand(default, frame_args)
end
return "{{{" .. expand(self[1], frame_args) .. "}}}"
end
function Parameter:expand(frame_args)
if frame_args == nil then
return self:get_default()
end
local name = expand(self[1], frame_args)
local val = frame_args[scribunto_param_key(name)] -- Parameter in use.
if val ~= nil then
return val
end
val = self[2] -- Default.
if val ~= nil then
return expand(val, frame_args)
end
return "{{{" .. name .. "}}}"
end
local Argument = Node:new_class("argument")
function Argument:__tostring()
return tostring(self[1]) .. "=" .. tostring(self[2])
end
function Argument:expand(frame_args)
return expand(self[1], frame_args) .. "=" .. expand(self[2], frame_args)
end
local Template = Node:new_class("template")
function Template:__tostring()
local output = {}
for i = 1, #self do
output[i] = tostring(self[i])
end
return "{{" .. concat(output, "|") .. "}}"
end
-- Normalize the template name, check it's a valid template, then memoize results (using false for invalid titles).
-- Parser functions (e.g. {{#IF:a|b|c}}) need to have the first argument extracted from the title, as it comes after the colon. Because of this, the parser function and first argument are memoized as a table.
-- FIXME: Some parser functions have special argument handling (e.g. {{#SWITCH:}}).
do
local page_title = mw_title.getCurrentTitle()
local namespace_has_subpages = mw.site.namespaces[page_title.namespace].hasSubpages
local raw_pagename = page_title.fullText
local templates = {}
local parser_variables = {}
local parser_functions = {}
local function retrieve_magic_word_data(chunk)
local mgw_data = (magic_words or get_magic_words())[chunk]
if mgw_data then
return mgw_data
end
local normalized = uupper(chunk)
mgw_data = magic_words[normalized]
if mgw_data and not mgw_data.case_sensitive then
return mgw_data
end
end
-- Returns the name required to transclude the title object `title` using
-- template {{ }} syntax.
local function get_template_invocation_name(title)
if not is_valid_title(title) then
error("Template invocations require a valid page title, which cannot contain an interwiki prefix.")
end
local namespace = title.namespace
-- If not in the template namespace, include the prefix (or ":" if
-- mainspace).
if namespace ~= 10 then
return namespace == 0 and ":" .. title.text or title.prefixedText
end
-- If in the template namespace and it shares a name with a magic word,
-- it needs the prefix "Template:".
local text = title.text
local colon = find(text, ":", 1, true)
if not colon then
local mgw_data = retrieve_magic_word_data(text)
return mgw_data and mgw_data.parser_variable and title.prefixedText or text
end
local mgw_data = retrieve_magic_word_data(sub(text, 1, colon - 1))
if mgw_data and (mgw_data.parser_function or mgw_data.transclusion_modifier) then
return title.prefixedText
end
-- Also if "Template:" is necessary for disambiguation (e.g.
-- "Template:Category:Foo" can't be abbreviated to "Category:Foo").
local check = new_title(text, 10)
return check and title_equals(title, check) and text or title.prefixedText
end
export.getTemplateInvocationName = get_template_invocation_name
-- Returns whether a title is a redirect or not. Structured like this to
-- allow the use of pcall, since it will throw an error if the expensive
-- parser function limit has been reached.
local function is_redirect(title)
return title.isRedirect
end
function parse_template_name(name, has_args, fragment, force_transclusion)
local chunks, colon, start, n, p = {}, find(name, ":", 1, true), 1, 0, 0
while colon do
-- Pattern applies PHP ltrim.
local mgw_data = retrieve_magic_word_data(match(sub(name, start, colon - 1), "[^%z\t-\v\r ].*") or "")
if not mgw_data then
break
end
local priority = mgw_data.priority
if not (priority and priority > p) then
local pf = mgw_data.parser_function and mgw_data.name or nil
if pf then
n = n + 1
chunks[n] = pf .. ":"
return chunks, "parser function", sub(name, colon + 1)
end
break
end
n = n + 1
chunks[n] = mgw_data.name .. ":"
start, p = colon + 1, priority
colon = find(name, ":", start, true)
end
if start > 1 then
name = sub(name, start)
end
name = php_trim(name)
-- Parser variables can only take SUBST:/SAFESUBST: as modifiers.
if not has_args and p <= 1 then
local mgw_data = retrieve_magic_word_data(name)
local pv = mgw_data and mgw_data.parser_variable and mgw_data.name or nil
if pv then
n = n + 1
chunks[n] = pv
return chunks, "parser variable"
end
end
-- Handle relative template names.
if namespace_has_subpages then
-- If the name starts with "/", it's treated as a subpage of the
-- current page. Final slashes are trimmed, but this can't affect
-- the intervening slash (e.g. {{///}} refers to "{{PAGENAME}}/").
local initial = sub(name, 1, 1)
if initial == "/" then
name = raw_pagename .. (match(name, "^/.*[^/]") or "/")
-- If it starts with "../", trim it and any that follow, and go up
-- that many subpage levels. Then, treat any additional text as
-- a subpage of that page; final slashes are trimmed.
elseif initial == "." and sub(name, 2, 3) == "./" then
local n = 4
while sub(name, n, n + 2) == "../" do
n = n + 3
end
-- Retain an initial "/".
name = sub(name, n - 1)
-- Trim the relevant number of subpages from the pagename.
local pagename, i = reverse(raw_pagename), 0
for _ = 1, (n - 1) / 3 do
i = find(pagename, "/", i + 1, true)
-- Fail if there aren't enough slashes.
if not i then
return nil
end
end
-- Add the subpage text; since the intervening "/" is retained
-- in `name`, it can be trimmed along with any other final
-- slashes (e.g. {{..///}} refers to "{{BASEPAGENAME}}".)
name = reverse(sub(pagename, i + 1)) .. (match(name, "^.*[^/]") or "")
end
end
local title = new_title(name, 10)
if not is_valid_title(title) then
return nil
end
-- If `fragment` is set, save the original title's fragment, since it
-- won't carry through to any redirect targets.
if fragment then
fragment = title.fragment
end
-- Resolve any redirects. Note that is_valid_title treats interwiki
-- titles as invalid, which is correct in this case: if the redirect
-- target is an interwiki link, the template won't fail, but the
-- redirect does not get resolved (i.e. the redirect page itself gets
-- transcluded, so the template name should not be normalized to the
-- target). It also treats titles that only have fragments as invalid
-- (e.g. "#foo"), but these can't be used as redirects anyway.
-- title.redirectTarget increments the expensive parser function count,
-- but avoids extraneous transclusions polluting template lists and the
-- performance hit caused by indiscriminately grabbing redirectTarget.
-- However, if the expensive parser function limit has already been hit,
-- redirectTarget is used as a fallback. force_transclusion forces the
-- use of the fallback.
local redirect = true
if not force_transclusion then
local success, resolved = pcall(is_redirect, title)
if success and not resolved then
redirect = false
end
end
if redirect then
redirect = title.redirectTarget
if is_valid_title(redirect) then
title = redirect
end
end
local chunk = get_template_invocation_name(title)
-- Set the fragment (if applicable).
if fragment then
chunk = chunk .. "#" .. fragment
end
chunks[n + 1] = chunk
return chunks, "template"
end
-- Note: force_transclusion avoids incrementing the expensive parser
-- function count by forcing transclusion instead. This should only be used
-- when there is a real risk that the expensive parser function limit of
-- 500 will be hit.
local function process_name(self, frame_args, force_transclusion)
local name = expand(self[1], frame_args)
local has_args, norm = #self > 1
if not has_args then
norm = parser_variables[name]
if norm then
return norm, "parser variable"
end
end
norm = templates[name]
if norm then
local pf_arg1 = parser_functions[name]
return norm, pf_arg1 and "parser function" or "template", pf_arg1
elseif norm == false then
return nil
end
local chunks, subclass, pf_arg1 = parse_template_name(name, has_args, nil, force_transclusion)
-- Fail if invalid.
if not chunks then
templates[name] = false
return nil
end
local chunk1 = chunks[1]
-- Fail on SUBST:.
if chunk1 == "SUBST:" then
templates[name] = false
return nil
-- Any modifiers are ignored.
elseif subclass == "parser function" then
local pf = chunks[#chunks]
templates[name] = pf
parser_functions[name] = pf_arg1
return pf, "parser function", pf_arg1
end
-- Ignore SAFESUBST:, and treat MSGNW: as a parser function with the pagename as its first argument (ignoring any RAW: that comes after).
if chunks[chunk1 == "SAFESUBST:" and 2 or 1] == "MSGNW:" then
pf_arg1 = chunks[#chunks]
local pf = "MSGNW:"
templates[name] = pf
parser_functions[name] = pf_arg1
return pf, "parser function", pf_arg1
end
-- Ignore any remaining modifiers, as they've done their job.
local output = chunks[#chunks]
if subclass == "parser variable" then
parser_variables[name] = output
else
templates[name] = output
end
return output, subclass
end
function Template:get_name(frame_args, force_transclusion)
-- Only return the first return value.
return (process_name(self, frame_args, force_transclusion))
end
function Template:get_arguments(frame_args)
local name, subclass, pf_arg1 = process_name(self, frame_args)
if name == nil then
return nil
elseif subclass == "parser variable" then
return {}
end
local template_args = {}
if subclass == "parser function" then
template_args[1] = pf_arg1
for i = 2, #self do
template_args[i] = expand(self[i], frame_args) -- Not trimmed.
end
return template_args
end
local implicit = 0
for i = 2, #self do
local arg = self[i]
if class_else_type(arg) == "argument" then
template_args[scribunto_param_key(expand(arg[1], frame_args))] = php_trim(expand(arg[2], frame_args))
else
implicit = implicit + 1
template_args[implicit] = expand(arg, frame_args) -- Not trimmed.
end
end
return template_args
end
end
-- BIG TODO: manual template expansion.
function Template:expand()
return (frame or get_frame()):preprocess(tostring(self))
end
local Tag = Node:new_class("tag")
do
local php_htmlspecialchars_data
local function get_php_htmlspecialchars_data()
php_htmlspecialchars_data, get_php_htmlspecialchars_data = (data or get_data()).php_htmlspecialchars, nil
return php_htmlspecialchars_data
end
local function php_htmlspecialchars(str, compat)
return (gsub(str, compat and "[&\"<>]" or "[&\"'<>]", php_htmlspecialchars_data or get_php_htmlspecialchars_data()))
end
function Tag:__tostring()
local open_tag, attributes, n = {"<", self.name}, self:get_attributes(), 2
for attr, value in next, attributes do
n = n + 1
open_tag[n] = " " .. php_htmlspecialchars(attr) .. "=\"" .. php_htmlspecialchars(value, true) .. "\""
end
if self.self_closing then
return concat(open_tag) .. "/>"
end
return concat(open_tag) .. ">" .. concat(self) .. "</" .. self.name .. ">"
end
local valid_attribute_name
local function get_valid_attribute_name()
valid_attribute_name, get_valid_attribute_name = (data or get_data()).valid_attribute_name, nil
return valid_attribute_name
end
function Tag:get_attributes()
local raw = self.attributes
if not raw then
self.attributes = {}
return self.attributes
elseif type(raw) == "table" then
return raw
end
if sub(raw, -1) == "/" then
raw = sub(raw, 1, -2)
end
local attributes, head = {}, 1
-- Semi-manual implementation of the native regex.
while true do
local name, loc = match(raw, "([^\t\n\f\r />][^\t\n\f\r /=>]*)()", head)
if not name then
break
end
head = loc
local value
loc = match(raw, "^[\t\n\f\r ]*=[\t\n\f\r ]*()", head)
if loc then
head = loc
-- Either "", '' or the value ends on a space/at the end. Missing
-- end quotes are repaired by closing the value at the end.
value, loc = match(raw, "^\"([^\"]*)\"?()", head)
if not value then
value, loc = match(raw, "^'([^']*)'?()", head)
if not value then
value, loc = match(raw, "^([^\t\n\f\r ]*)()", head)
end
end
head = loc
end
-- valid_attribute_name is a pattern matching a valid attribute name.
-- Defined in the data due to its length - see there for more info.
if umatch(name, valid_attribute_name or get_valid_attribute_name()) then
-- Sanitizer applies PHP strtolower (ASCII-only).
attributes[lower(name)] = value and decode_entities(
php_trim((gsub(value, "[\t\n\r ]+", " ")))
) or ""
end
end
self.attributes = attributes
return attributes
end
end
function Tag:expand()
return (frame or get_frame()):preprocess(tostring(self))
end
local Heading = Node:new_class("heading")
function Heading:new(this)
if #this > 1 then
local success, str = pcall(concat, this)
if success then
return Node.new(self, {
str,
level = this.level,
section = this.section,
index = this.index
})
end
end
return Node.new(self, this)
end
function Heading:__tostring()
local eq = rep("=", self.level)
return eq .. Node.__tostring(self) .. eq
end
do
local expand_node = Node.expand
-- Expanded heading names can contain "\n" (e.g. inside nowiki tags), which
-- causes any heading containing them to fail. However, in such cases, the
-- native parser still treats it as a heading for the purpose of section
-- numbers.
local function validate_name(self, frame_args)
local name = expand_node(self, frame_args)
if find(name, "\n", 1, true) then
return nil
end
return name
end
function Heading:get_name(frame_args)
local name = validate_name(self, frame_args)
return name ~= nil and php_trim(name) or nil
end
-- FIXME: account for anchor disambiguation.
function Heading:get_anchor(frame_args)
local name = validate_name(self, frame_args)
return name ~= nil and decode_entities(anchor_encode(name)) or nil
end
function Heading:expand(frame_args)
local eq = rep("=", self.level)
return eq .. expand_node(self, frame_args) .. eq
end
end
------------------------------------------------------------------------------------
--
-- Parser
--
------------------------------------------------------------------------------------
function Parser:read(i, j)
local head, i = self.head, i or 0
return sub(self.text, head + i, head + (j or i))
end
function Parser:advance(n)
self.head = self.head + (n or self[-1].step or 1)
end
function Parser:jump(head)
self.head = head
self[-1].nxt = nil
end
function Parser:set_pattern(pattern)
local layer = self[-1]
layer.pattern = pattern
layer.nxt = nil
end
function Parser:consume()
local layer = self[-1]
local this = layer.nxt
if this then
layer.nxt = nil
else
local text, head = self.text, self.head
local loc1, loc2 = find(text, layer.pattern, head)
if loc1 == head or not loc1 then
this = sub(text, head, loc2)
else
this = sub(text, head, loc1 - 1)
layer.nxt = sub(text, loc1, loc2)
end
end
layer.step = #this
return layer.handler(self, this)
end
-- Template or parameter.
-- Parsed by matching the opening braces innermost-to-outermost (ignoring lone closing braces). Parameters {{{ }}} take priority over templates {{ }} where possible, but a double closing brace will always result in a closure, even if there are 3+ opening braces.
-- For example, "{{{{foo}}}}" (4) is parsed as a parameter enclosed by single braces, and "{{{{{foo}}}}}" (5) is a parameter inside a template. However, "{{{{{foo }} }}}" is a template inside a parameter, due to "}}" forcing the closure of the inner node.
do
-- Handlers.
local handle_name
local handle_argument
local function do_template_or_parameter(self, inner_node)
self:push_sublayer(handle_name)
self:set_pattern("[\n<[{|}]")
-- If a node has already been parsed, nest it at the start of the new
-- outer node (e.g. when parsing"{{{{foo}}bar}}", the template "{{foo}}"
-- is parsed first, since it's the innermost, and becomes the first
-- node of the outer template.
if inner_node then
self:emit(inner_node)
end
end
function handle_name(self, ...)
handle_name = self:switch(handle_name, {
["\n"] = Parser.heading_block,
["<"] = Parser.tag,
["["] = Parser.wikilink_block,
["{"] = Parser.braces,
["|"] = function(self)
self:emit(Wikitext:new(self:pop_sublayer()))
self:push_sublayer(handle_argument)
self:set_pattern("[\n<=[{|}]")
end,
["}"] = function(self)
if self:read(1) == "}" then
self:emit(Wikitext:new(self:pop_sublayer()))
return self:pop()
end
self:emit("}")
end,
[""] = Parser.fail_route,
[false] = Parser.emit
})
return handle_name(self, ...)
end
function handle_argument(self, ...)
local function emit_argument(self)
local arg = Wikitext:new(self:pop_sublayer())
local layer = self[-1]
local key = layer.key
if key then
arg = Argument:new{key, arg}
layer.key = nil
end
self:emit(arg)
end
handle_argument = self:switch(handle_argument, {
["\n"] = function(self)
return self:heading_block("\n", self[-1].key and "=" or "==")
end,
["<"] = Parser.tag,
["="] = function(self)
local key = Wikitext:new(self:pop_sublayer())
self[-1].key = key
self:push_sublayer(handle_argument)
self:set_pattern("[\n<[{|}]")
end,
["["] = Parser.wikilink_block,
["{"] = Parser.braces,
["|"] = function(self)
emit_argument(self)
self:push_sublayer(handle_argument)
self:set_pattern("[\n<=[{|}]")
end,
["}"] = function(self)
if self:read(1) == "}" then
emit_argument(self)
return self:pop()
end
self:emit("}")
end,
[""] = Parser.fail_route,
[false] = Parser.emit
})
return handle_argument(self, ...)
end
function Parser:template_or_parameter()
local text, head, node_to_emit, failed = self.text, self.head
-- Comments/tags interrupt the brace count.
local braces = match(text, "^{+()", head) - head
self:advance(braces)
while true do
local success, node = self:try(do_template_or_parameter, node_to_emit)
-- Fail means no "}}" or "}}}" was found, so emit any remaining
-- unmatched opening braces before any templates/parameters that
-- were found.
if not success then
self:emit(rep("{", braces))
failed = true
break
-- If there are 3+ opening and closing braces, it's a parameter.
elseif braces >= 3 and self:read(2) == "}" then
self:advance(3)
braces = braces - 3
node = Parameter:new(node)
-- Otherwise, it's a template.
else
self:advance(2)
braces = braces - 2
node = Template:new(node)
end
local index = head + braces
node.index = index
node.raw = sub(text, index, self.head - 1)
node_to_emit = node
-- Terminate once not enough braces remain for further matches.
if braces == 0 then
break
-- Emit any stray opening brace before any matched nodes.
elseif braces == 1 then
self:emit("{")
break
end
end
if node_to_emit then
self:emit(node_to_emit)
end
return braces, failed
end
end
-- Tag.
do
local end_tags
local function get_end_tags()
end_tags, get_end_tags = (data or get_data()).end_tags, nil
return end_tags
end
-- Handlers.
local handle_start
local handle_tag
local function do_tag(self)
local layer = self[-1]
layer.handler, layer.index = handle_start, self.head
self:set_pattern("[%s/>]")
self:advance()
end
local function is_ignored_tag(self, this)
if self.transcluded then
return this == "includeonly"
end
return this == "noinclude" or this == "onlyinclude"
end
local function ignored_tag(self, text, head)
local loc = find(text, ">", head, true)
if not loc then
return self:fail_route()
end
self:jump(loc)
local tag = self:pop()
tag.ignored = true
return tag
end
function handle_start(self, this)
if this == "/" then
local text, head = self.text, self.head + 1
local this = match(text, "^[^%s/>]+", head)
if this and is_ignored_tag(self, lower(this)) then
head = head + #this
if not match(text, "^/[^>]", head) then
return ignored_tag(self, text, head)
end
end
return self:fail_route()
elseif this == "" then
return self:fail_route()
end
-- Tags are only case-insensitive with ASCII characters.
local raw_name = this
this = lower(this)
local end_tag_pattern = (end_tags or get_end_tags())[this]
if not end_tag_pattern then -- Validity check.
return self:fail_route()
end
local layer = self[-1]
local text, head = self.text, self.head + layer.step
if match(text, "^/[^>]", head) then
return self:fail_route()
elseif is_ignored_tag(self, this) then
return ignored_tag(self, text, head)
-- If an onlyinclude tag is not ignored (and cannot be active since it
-- would have triggered special handling earlier), it must be plaintext.
elseif this == "onlyinclude" then
return self:fail_route()
elseif this == "noinclude" or this == "includeonly" then
layer.ignored = true -- Ignored block.
layer.raw_name = raw_name
end
layer.name, layer.handler, layer.end_tag_pattern = this, handle_tag, end_tag_pattern
self:set_pattern(">")
end
function handle_tag(self, this)
if this == "" then
return self:fail_route()
elseif this ~= ">" then
self[-1].attributes = this
return
elseif self:read(-1) == "/" then
self[-1].self_closing = true
return self:pop()
end
local text, head, layer = self.text, self.head + 1, self[-1]
local loc1, loc2 = find(text, layer.end_tag_pattern, head)
if loc1 then
if loc1 > head then
self:emit(sub(text, head, loc1 - 1))
end
self:jump(loc2)
return self:pop()
-- noinclude and includeonly will tolerate having no closing tag, but
-- only if given in lowercase. This is due to a preprocessor bug, as
-- it uses a regex with the /i (case-insensitive) flag to check for
-- end tags, but a simple array lookup with lowercase tag names when
-- looking up which tags should tolerate no closing tag (exact match
-- only, so case-sensitive).
elseif layer.ignored then
local raw_name = layer.raw_name
if raw_name == "noinclude" or raw_name == "includeonly" then
self:jump(#text)
return self:pop()
end
end
return self:fail_route()
end
function Parser:tag()
-- HTML comment.
if self:read(1, 3) == "!--" then
local text = self.text
self:jump(select(2, find(text, "-->", self.head + 4, true)) or #text)
-- onlyinclude tags (which must be lowercase with no whitespace).
elseif self.onlyinclude and self:read(1, 13) == "/onlyinclude>" then
local text = self.text
self:jump(select(2, find(text, "<onlyinclude>", self.head + 14, true)) or #text)
else
local success, tag = self:try(do_tag)
if not success then
self:emit("<")
elseif not tag.ignored then
tag.end_tag_pattern = nil
self:emit(Tag:new(tag))
end
end
end
end
-- Heading.
-- The preparser assigns each heading a number, which is used for things like section edit links. The preparser will only do this for heading blocks which aren't nested inside templates, parameters and parser tags. In some cases (e.g. when template blocks contain untrimmed newlines), a preparsed heading may not be treated as a heading in the final output. That does not affect the preparser, however, which will always count sections based on the preparser heading count, since it can't know what a template's final output will be.
do
-- Handlers.
local handle_start
local handle_body
local handle_possible_end
local function do_heading(self)
local layer, head = self[-1], self.head
layer.handler, layer.index = handle_start, head
self:set_pattern("[\t\n ]")
-- Comments/tags interrupt the equals count.
local eq = match(self.text, "^=+()", head) - head
layer.level = eq
self:advance(eq)
end
local function do_heading_possible_end(self)
local layer = self[-1]
layer.handler = handle_possible_end
self:set_pattern("[\n<]")
end
function handle_start(self, ...)
-- ===== is "=" as an L2; ======== is "==" as an L3 etc.
local function newline(self)
local layer = self[-1]
local eq = layer.level
if eq <= 2 then
return self:fail_route()
end
-- Calculate which equals signs determine the heading level.
local level_eq = eq - (2 - eq % 2)
level_eq = level_eq > 12 and 12 or level_eq
-- Emit the excess.
self:emit(rep("=", eq - level_eq))
layer.level = level_eq / 2
return self:pop()
end
local function whitespace(self)
local success, possible_end = self:try(do_heading_possible_end)
if success then
self:emit(Wikitext:new(possible_end))
local layer = self[-1]
layer.handler = handle_body
self:set_pattern("[\n<=[{]")
return self:consume()
end
return newline(self)
end
handle_start = self:switch(handle_start, {
["\t"] = whitespace,
["\n"] = newline,
[" "] = whitespace,
[""] = newline,
[false] = function(self)
-- Emit any excess = signs once we know it's a conventional heading. Up till now, we couldn't know if the heading is just a string of = signs (e.g. ========), so it wasn't guaranteed that the heading text starts after the 6th.
local layer = self[-1]
local eq = layer.level
if eq > 6 then
self:emit(1, rep("=", eq - 6))
layer.level = 6
end
layer.handler = handle_body
self:set_pattern("[\n<=[{]")
return self:consume()
end
})
return handle_start(self, ...)
end
function handle_body(self, ...)
handle_body = self:switch(handle_body, {
["\n"] = Parser.fail_route,
["<"] = Parser.tag,
["="] = function(self)
-- Comments/tags interrupt the equals count.
local eq = match(self.text, "^=+", self.head)
local eq_len = #eq
self:advance(eq_len)
local success, possible_end = self:try(do_heading_possible_end)
if success then
self:emit(eq)
self:emit(Wikitext:new(possible_end))
return self:consume()
end
local layer = self[-1]
local level = layer.level
if eq_len > level then
self:emit(rep("=", eq_len - level))
elseif level > eq_len then
layer.level = eq_len
self:emit(1, rep("=", level - eq_len))
end
return self:pop()
end,
["["] = Parser.wikilink_block,
["{"] = function(self, this)
return self:braces("{", true)
end,
[""] = Parser.fail_route,
[false] = Parser.emit
})
return handle_body(self, ...)
end
function handle_possible_end(self, ...)
handle_possible_end = self:switch(handle_possible_end, {
["\n"] = Parser.fail_route,
["<"] = function(self)
if self:read(1, 3) ~= "!--" then
return self:pop()
end
local head = select(2, find(self.text, "-->", self.head + 4, true))
if not head then
return self:pop()
end
self:jump(head)
end,
[""] = Parser.fail_route,
[false] = function(self, this)
if not match(this, "^[\t ]+()$") then
return self:pop()
end
self:emit(this)
end
})
return handle_possible_end(self, ...)
end
function Parser:heading()
local success, heading = self:try(do_heading)
if success then
local section = self.section + 1
heading.section = section
self.section = section
self:emit(Heading:new(heading))
return self:consume()
else
self:emit("=")
end
end
end
------------------------------------------------------------------------------------
--
-- Block handlers
--
------------------------------------------------------------------------------------
-- Block handlers.
-- These are blocks which can affect template/parameter parsing, since they're also parsed by Parsoid at the same time (even though they aren't processed until later).
-- All blocks (including templates/parameters) can nest inside each other, but an inner block must be closed before the outer block which contains it. This is why, for example, the wikitext "{{template| [[ }}" will result in an unprocessed template, since the inner "[[" is treated as the opening of a wikilink block, which prevents "}}" from being treated as the closure of the template block. On the other hand, "{{template| [[ ]] }}" will process correctly, since the wikilink block is closed before the template closure. It makes no difference whether the block will be treated as valid or not when it's processed later on, so "{{template| [[ }} ]] }}" would also work, even though "[[ }} ]]" is not a valid wikilink.
-- Note that nesting also affects pipes and equals signs, in addition to block closures.
-- These blocks can be nested to any degree, so "{{template| [[ [[ [[ ]] }}" will not work, since only one of the three wikilink blocks has been closed. On the other hand, "{{template| [[ [[ [[ ]] ]] ]] }}" will work.
-- All blocks are implicitly closed by the end of the text, since their validity is irrelevant at this stage.
-- Language conversion block.
-- Opens with "-{" and closes with "}-". However, templates/parameters take priority, so "-{{" is parsed as "-" followed by the opening of a template/parameter block (depending on what comes after).
-- Note: Language conversion blocks aren't actually enabled on the English Wiktionary, but Parsoid still parses them at this stage, so they can affect the closure of outer blocks: e.g. "[[ -{ ]]" is not a valid wikilink block, since the "]]" falls inside the new language conversion block.
do
--Handler.
local handle_language_conversion_block
local function do_language_conversion_block(self)
local layer = self[-1]
layer.handler = handle_language_conversion_block
self:set_pattern("[\n<[{}]")
end
function handle_language_conversion_block(self, ...)
handle_language_conversion_block = self:switch(handle_language_conversion_block, {
["\n"] = Parser.heading_block,
["<"] = Parser.tag,
["["] = Parser.wikilink_block,
["{"] = Parser.braces,
["}"] = function(self)
if self:read(1) == "-" then
self:emit("}-")
self:advance()
return self:pop()
end
self:emit("}")
end,
[""] = Parser.pop,
[false] = Parser.emit
})
return handle_language_conversion_block(self, ...)
end
function Parser:braces(this, fail_on_unclosed_braces)
local language_conversion_block = self:read(-1) == "-"
if self:read(1) == "{" then
local braces, failed = self:template_or_parameter()
-- Headings will fail if they contain an unclosed brace block.
if failed and fail_on_unclosed_braces then
return self:fail_route()
-- Language conversion blocks cannot begin "-{{", but can begin
-- "-{{{" iff parsed as "-{" + "{{".
elseif not (language_conversion_block and braces == 1) then
return self:consume()
end
else
self:emit(this)
if not language_conversion_block then
return
end
self:advance()
end
self:emit(Wikitext:new(self:get(do_language_conversion_block)))
end
end
--[==[
Headings
Opens with "\n=" (or "=" at the start of the text), and closes with "\n" or the end of the text. Note that it doesn't matter whether the heading will fail to process due to a premature newline (e.g. if there are no closing signs), so at this stage the only thing that matters for closure is the newline or end of text.
Note: Heading blocks are only parsed like this if they occur inside a template, since they do not iterate the preparser's heading count (i.e. they aren't proper headings).
Note 2: if directly inside a template argument with no previous equals signs, a newline followed by a single equals sign is parsed as an argument equals sign, not the opening of a new L1 heading block. This does not apply to any other heading levels. As such, {{template|key\n=}}, {{template|key\n=value}} or even {{template|\n=}} will successfully close, but {{template|key\n==}}, {{template|key=value\n=more value}}, {{template\n=}} etc. will not, since in the latter cases the "}}" would fall inside the new heading block.
]==]
do
--Handler.
local handle_heading_block
local function do_heading_block(self)
local layer = self[-1]
layer.handler = handle_heading_block
self:set_pattern("[\n<[{]")
end
function handle_heading_block(self, ...)
handle_heading_block = self:switch(handle_heading_block, {
["\n"] = function(self)
self:newline()
return self:pop()
end,
["<"] = Parser.tag,
["["] = Parser.wikilink_block,
["{"] = Parser.braces,
[""] = Parser.pop,
[false] = Parser.emit
})
return handle_heading_block(self, ...)
end
function Parser:heading_block(this, nxt)
self:newline()
this = this .. (nxt or "=")
local loc = #this - 1
while self:read(0, loc) == this do
self:advance()
self:emit(Wikitext:new(self:get(do_heading_block)))
end
end
end
-- Wikilink block.
-- Opens with "[[" and closes with "]]".
do
-- Handler.
local handle_wikilink_block
local function do_wikilink_block(self)
local layer = self[-1]
layer.handler = handle_wikilink_block
self:set_pattern("[\n<[%]{]")
end
function handle_wikilink_block(self, ...)
handle_wikilink_block = self:switch(handle_wikilink_block, {
["\n"] = Parser.heading_block,
["<"] = Parser.tag,
["["] = Parser.wikilink_block,
["]"] = function(self)
if self:read(1) == "]" then
self:emit("]]")
self:advance()
return self:pop()
end
self:emit("]")
end,
["{"] = Parser.braces,
[""] = Parser.pop,
[false] = Parser.emit
})
return handle_wikilink_block(self, ...)
end
function Parser:wikilink_block()
if self:read(1) == "[" then
self:emit("[[")
self:advance(2)
self:emit(Wikitext:new(self:get(do_wikilink_block)))
else
self:emit("[")
end
end
end
-- Lines which only contain comments, " " and "\t" are eaten, so long as
-- they're bookended by "\n" (i.e. not the first or last line).
function Parser:newline()
local text, head = self.text, self.head
while true do
repeat
local loc = match(text, "^[\t ]*<!%-%-()", head + 1)
if not loc then
break
end
loc = select(2, find(text, "-->", loc, true))
head = loc or head
until not loc
-- Fail if no comments found.
if head == self.head then
break
end
head = match(text, "^[\t ]*()\n", head + 1)
if not head then
break
end
self:jump(head)
end
self:emit("\n")
end
do
-- Handlers.
local handle_start
local main_handler
-- If `transcluded` is true, then the text is checked for a pair of
-- onlyinclude tags. If these are found (even if they're in the wrong
-- order), then the start of the page is treated as though it is preceded
-- by a closing onlyinclude tag.
-- Note 1: unlike other parser extension tags, onlyinclude tags are case-
-- sensitive and cannot contain whitespace.
-- Note 2: onlyinclude tags *can* be implicitly closed by the end of the
-- text, but the hard requirement above means this can only happen if
-- either the tags are in the wrong order or there are multiple onlyinclude
-- blocks.
local function do_parse(self, transcluded)
local layer = self[-1]
layer.handler = handle_start
self:set_pattern(".")
self.section = 0
if not transcluded then
return
end
self.transcluded = true
local text = self.text
if find(text, "</onlyinclude>", 1, true) then
local head = find(text, "<onlyinclude>", 1, true)
if head then
self.onlyinclude = true
self:jump(head + 13)
end
end
end
-- If the first character is "=", try parsing it as a heading.
function handle_start(self, this)
local layer = self[-1]
layer.handler = main_handler
self:set_pattern("[\n<{]")
if this == "=" then
return self:heading()
end
return self:consume()
end
function main_handler(self, ...)
main_handler = self:switch(main_handler, {
["\n"] = function(self)
self:newline()
if self:read(1) == "=" then
self:advance()
return self:heading()
end
end,
["<"] = Parser.tag,
["{"] = function(self)
if self:read(1) == "{" then
self:template_or_parameter()
return self:consume()
end
self:emit("{")
end,
[""] = Parser.pop,
[false] = Parser.emit
})
return main_handler(self, ...)
end
function export.parse(text, transcluded)
local text_type = type(text)
return (select(2, Parser:parse{
text = text_type == "string" and text or
text_type == "number" and tostring(text) or
error("bad argument #1 (string expected, got " .. text_type .. ")"),
node = {Wikitext, true},
route = {do_parse, transcluded}
}))
end
parse = export.parse
end
do
local function next_template(iter)
while true do
local node = iter()
if node == nil or class_else_type(node) == "template" then
return node
end
end
end
function export.find_templates(text, not_transcluded)
return next_template, parse(text, not not_transcluded):__pairs("next_node")
end
end
do
local link_parameter_1, link_parameter_2
local function get_link_parameter_1()
link_parameter_1, get_link_parameter_1 = (data or get_data()).template_link_param_1, nil
return link_parameter_1
end
local function get_link_parameter_2()
link_parameter_2, get_link_parameter_2 = (data or get_data()).template_link_param_2, nil
return link_parameter_2
end
-- Generate a link. If the target title doesn't have a fragment, use "#top"
-- (which is an implicit anchor at the top of every page), as this ensures
-- self-links still display as links, since bold display is distracting and
-- unintuitive for template links.
local function link_page(title, display)
local fragment = title.fragment
if fragment == "" then
fragment = "top"
end
return format(
"[[:%s|%s]]",
encode_uri(title.prefixedText .. "#" .. fragment, "WIKI"),
display
)
end
-- pf_arg1 or pf_arg2 may need to be linked if a given parser function
-- treats them as a pagename. If a key exists in `namespace`, the value is
-- the namespace for the page: if not 0, then the namespace prefix will
-- always be added to the input (e.g. {{#invoke:}} can only target the
-- Module: namespace, so inputting "Template:foo" gives
-- "Module:Template:foo", and "Module:foo" gives "Module:Module:foo").
-- However, this isn't possible with mainspace (namespace 0), so prefixes
-- are respected. make_title handles all of this automatically.
local function finalize_arg(pagename, namespace)
if namespace == nil then
return pagename
end
local title = make_title(namespace, pagename)
if not (title and is_valid_title(title)) then
return pagename
end
return link_page(title, pagename)
end
local function render_title(name, args)
-- parse_template_name returns a table of transclusion modifiers plus
-- the normalized template/magic word name, which will be used as link
-- targets. The third return value pf_arg1 is the first argument of a
-- a parser function, which comes after the colon (e.g. "foo" in
-- "{{#IF:foo|bar|baz}}"). This means args[1] (i.e. the first argument
-- that comes after a pipe is actually argument 2, and so on. Note: the
-- second parameter of parse_template_name checks if there are any
-- arguments, since parser variables cannot take arguments (e.g.
-- {{CURRENTYEAR}} is a parser variable, but {{CURRENTYEAR|foo}}
-- transcludes "Template:CURRENTYEAR"). In such cases, the returned
-- table explicitly includes the "Template:" prefix in the template
-- name. The third parameter instructs it to retain any fragment in the
-- template name in the returned table, if present.
local chunks, subclass, pf_arg1 = parse_template_name(
name,
args and pairs(args)(args) ~= nil,
true
)
if chunks == nil then
return name, args
end
local chunks_len = #chunks
-- Additionally, generate the corresponding table `rawchunks`, which
-- is a list of colon-separated chunks in the raw input. This is used
-- to retrieve the display forms for each chunk.
local rawchunks = split(name, ":")
for i = 1, chunks_len - 1 do
chunks[i] = format(
"[[%s|%s]]",
encode_uri((magic_words or get_magic_words())[sub(chunks[i], 1, -2)].transclusion_modifier, "WIKI"),
rawchunks[i]
)
end
local chunk = chunks[chunks_len]
-- If it's a template, return a link to it with link_page, concatenating
-- the remaining chunks in `rawchunks` to form the display text.
-- Use new_title with the default namespace 10 (Template:) to generate
-- a target title, which is the same setting used for retrieving
-- templates (including those in other namespaces, as prefixes override
-- the default).
if subclass == "template" then
chunks[chunks_len] = link_page(
new_title(chunk, 10),
concat(rawchunks, ":", chunks_len) -- :
)
return concat(chunks, ":"), args -- :
elseif subclass == "parser variable" then
chunks[chunks_len] = format(
"[[%s|%s]]",
encode_uri((magic_words or get_magic_words())[chunk].parser_variable, "WIKI"),
rawchunks[chunks_len]
)
return concat(chunks, ":"), args -- :
end
-- Otherwise, it must be a parser function.
local mgw_data = (magic_words or get_magic_words())[sub(chunk, 1, -2)]
local link = mgw_data.parser_function or mgw_data.transclusion_modifier
local pf_arg2 = args and args[1] or nil
-- Some magic words have different links, depending on whether argument
-- 2 is specified (e.g. "baz" in {{foo:bar|baz}}).
if type(link) == "table" then
link = pf_arg2 and link[2] or link[1]
end
chunks[chunks_len] = format(
"[[%s|%s]]",
encode_uri(link, "WIKI"),
rawchunks[chunks_len]
)
-- #TAG: has special handling, because documentation links for parser
-- extension tags come from [[Module:data/parser extension tags]].
if chunk == "#TAG:" then
-- Tags are only case-insensitive with ASCII characters.
local tag = (parser_extension_tags or get_parser_extension_tags())[lower(php_trim(pf_arg1))]
if tag then
pf_arg1 = format(
"[[%s|%s]]",
encode_uri(tag, "WIKI"),
pf_arg1
)
end
-- Otherwise, finalize pf_arg1 and add it to `chunks`.
else
pf_arg1 = finalize_arg(pf_arg1, (link_parameter_1 or get_link_parameter_1())[chunk])
end
chunks[chunks_len + 1] = pf_arg1
-- Finalize pf_arg2 (if applicable), then return.
if pf_arg2 then
args = shallowcopy(args) -- Avoid destructively modifying args.
args[1] = finalize_arg(pf_arg2, (link_parameter_2 or get_link_parameter_2())[chunk])
end
return concat(chunks, ":"), args -- :
end
function export.buildTemplate(title, args)
local output = {title}
if not args then
return output
end
-- Iterate over all numbered parameters in order, followed by any
-- remaining parameters in codepoint order. Implicit parameters are
-- used wherever possible, even if explicit numbers are interpolated
-- between them (e.g. 0 would go before any implicit parameters, and
-- 2.5 between 2 and 3).
-- TODO: handle "=" and "|" in params/values.
local implicit
for k, v in sorted_pairs(args) do
if type(k) == "number" and k >= 1 and k % 1 == 0 then
if implicit == nil then
implicit = table_len(args)
end
insert(output, k <= implicit and v or k .. "=" .. v)
else
insert(output, k .. "=" .. v)
end
end
return output
end
build_template = export.buildTemplate
function export.templateLink(title, args, no_link)
if not no_link then
title, args = render_title(title, args)
end
local output = build_template(title, args)
for i = 1, #output do
output[i] = encode_entities(output[i], "={}", true, true)
end
return tostring(html_create("code")
:css("white-space", "pre-wrap")
:wikitext("{{" .. concat(output, "|") .. "}}") -- {{ | }}
)
end
end
do
local function next_parameter(iter)
while true do
local node = iter()
if node == nil or class_else_type(node) == "parameter" then
return node
end
end
end
function export.find_parameters(text, not_transcluded)
return next_parameter, parse(text, not not_transcluded):__pairs("next_node")
end
function export.displayParameter(name, default)
return tostring(html_create("code")
:css("white-space", "pre-wrap")
:wikitext("{{{" .. concat({name, default}, "|") .. "}}}") -- {{{ | }}}
)
end
end
do
local function check_level(level)
if type(level) ~= "number" then
error("Heading levels must be numbers.")
elseif level < 1 or level > 6 or level % 1 ~= 0 then
error("Heading levels must be integers between 1 and 6.")
end
return level
end
local function next_heading(iter)
while true do
local node = iter()
if node == nil then
return nil
elseif class_else_type(node) == "heading" then
local level = node.level
if level >= iter.i and level <= iter.j then
return node
end
end
end
end
-- FIXME: should headings which contain "\n" be returned? This may depend
-- on variable factors, like template expansion. They iterate the heading
-- count number, but fail on rendering. However, in some cases a different
-- heading might still be rendered due to intermediate equals signs; it
-- may even be of a different heading level: e.g., this is parsed as an
-- L2 heading with a newline (due to the wikilink block), but renders as the
-- L1 heading "=foo[[". Section edit links are sometimes (but not always)
-- present in such cases.
-- ==[[=
-- ]]==
-- TODO: section numbers for edit links seem to also include headings
-- nested inside templates and parameters (but apparently not those in
-- parser extension tags - need to test this more). If we ever want to add
-- section edit links manually, this will need to be accounted for.
function export.find_headings(text, i, j)
local iter = parse(text):__pairs("next_node")
iter.i, iter.j = i and check_level(i) or 1, j and check_level(j) or 6
return next_heading, iter
end
end
do
local function make_tag(tag)
return tostring(html_create("code")
:css("white-space", "pre-wrap")
:wikitext("<" .. tag .. ">")
)
end
-- Note: invalid tags are returned without links.
function export.wikitagLink(tag)
-- ">" can't appear in tags (including attributes) since the parser
-- unconditionally treats ">" as the end of a tag.
if find(tag, ">", 1, true) then
return make_tag(tag)
end
-- Tags must start "<tagname..." or "</tagname...", with no whitespace
-- after "<" or "</".
local slash, tagname, remainder = match(tag, "^(/?)([^/%s]+)(.*)$")
if not tagname then
return make_tag(tag)
end
-- Tags are only case-insensitive with ASCII characters.
local link = lower(tagname)
if (
-- onlyinclude tags must be lowercase and are whitespace intolerant.
link == "onlyinclude" and (link ~= tagname or remainder ~= "") or
-- Closing wikitags (except onlyinclude) can only have whitespace
-- after the tag name.
slash == "/" and not match(remainder, "^%s*()$") or
-- Tagnames cannot be followed immediately by "/", unless it comes
-- at the end (e.g. "<nowiki/>", but not "<nowiki/ >").
remainder ~= "/" and sub(remainder, 1, 1) == "/"
) then
-- Output with no link.
return make_tag(tag)
end
-- Partial transclusion tags aren't in the table of parser extension
-- tags.
if link == "noinclude" or link == "includeonly" or link == "onlyinclude" then
link = "mw:Transclusion#Partial transclusion"
else
link = (parser_extension_tags or get_parser_extension_tags())[link]
end
if link then
tag = gsub(tag, pattern_escape(tagname), "[[" .. replacement_escape(encode_uri(link, "WIKI")) .. "|%0]]", 1)
end
return make_tag(tag)
end
end
-- For convenience.
export.class_else_type = class_else_type
return export